Two Stage Extruder
Weight: 15T
Voltage: 380V 50HZ 3Phase(Customized)
Plastic Processed: PE +40% Carbon black; filler masterbatch
Application: Granules
Certification: CE ISO
Screw Design: Double-screw & Single-screw
Description
Two Stage extruder Water Ring Pelletizer for Recycle Plastic
| Application | 40% carbon black + polymer granule | Based on premix process |
| Output range | 400-600kg/h | ~500rpm: depending on formulation and the used raw material as well as the operation conditions of extruder |
| Formulation | ratio of polymer: | PE: ≤80% |
| Formulation | ratio of powder: | Carbon black: ≤40% |
| Formulation | ratio of additive: | Little |
| Using conditions | Power: | 380v/50Hz, 3 phrase (customized) |
| Using conditions | Total power: | ~290kw |
| Using conditions | Cooling water: | Temperature: ≤38℃; pressure: ~0.45MPa;
Soft water temperature: ≤38℃ |
| Using conditions | Compressed air: | Pressure: 0.2~0.6MPa; temperature: ≤40℃ |
| Using conditions | Installation site: | Ambient temperature: 10-40℃;
relative humidity of air max.: 80%; non-condensing; installation height: ≤10m |
Application
a. For high filling masterbatch PE/PP/EVA ,+ Caco3, Tio2, Talc,Carbon Black , etc
b. For fiber reinforcement PP/PA/PBT/ABS/AS/PC/POM/PPS/PET +glass fiber, carbon black
PE + 85% Caco3
Including High speed mixer for mixing PE+85% Caco3+ addictives; Screw loader for loading materials, Extruder for extrusion; Air cooling hot face cutting pelletizing line for cooling and cutting
PP +70% Caco3
High speed mixer for mixing PE+ Caco3+ Addictives; Screw loader for loading materials , Extruder for extrusion, Water ring hot face cutting pelletizing line for cooling and pelletizing
